|Summary:||aha152x driver broken|
|Product:||[Retired] Red Hat Linux||Reporter:||Michael Olson <olson>|
|Component:||kernel||Assignee:||Arjan van de Ven <arjanv>|
|Status:||CLOSED ERRATA||QA Contact:||Brian Brock <bbrock>|
|Version:||8.0||CC:||cefrodrigues, dstrand, philip.r.schaffner|
|Fixed In Version:||Doc Type:||Bug Fix|
|Doc Text:||Story Points:||---|
|Last Closed:||2002-10-17 09:22:42 UTC||Type:||---|
|oVirt Team:||---||RHEL 7.3 requirements from Atomic Host:|
|Cloudforms Team:||---||Target Upstream Version:|
Description Michael Olson 2002-10-02 15:20:30 UTC
From Bugzilla Helper: User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.1) Gecko/20020830 Description of problem: Module refuses to load. Using the command modprobe aha152x io=0x340 irq=11 (This is the same command that worked one boot earlier under 7.3, just did a upgrade to 8.0 and it failed) /var/log/messages for failed command is. Oct 2 10:44:45 freedom kernel: aha152x: BIOS test: passed, detected 1 controller(s) Oct 2 10:44:45 freedom kernel: aha152x: resetting bus... Oct 2 10:44:45 freedom kernel: aha152x1: vital data: rev=1, io=0x340 (0x340/0x340), irq=11, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=1000, extended translation=disabled Oct 2 10:44:45 freedom kernel: aha152x1: trying software interrupt, lost. Oct 2 10:44:45 freedom kernel: aha152x1: IRQ 11 possibly wrong. Please verify. The card is set for IO=340 and IRQ=11, I don't know the brand/model of the card, it's from the faceless ranks of the 152x clones. Version-Release number of selected component (if applicable): How reproducible: Always Steps to Reproduce: 1. Install ISA 152x SCSI card on 0x340 and IRQ 11 2. Run modprobe aha152x io=0x340 irq=11 Actual Results: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.18-14/kernel/drivers/scsi/aha152x.o: insmod /lib/modules/2.4.18-14/kernel/drivers/scsi/aha152x.o failed /lib/modules/2.4.18-14/kernel/drivers/scsi/aha152x.o: insmod aha152x failed Exit 255 From /var/log/messages --------------------------------- ct 2 11:14:46 freedom kernel: aha152x: BIOS test: passed, detected 1 controller(s) Oct 2 11:14:46 freedom kernel: aha152x: resetting bus... Oct 2 11:14:46 freedom kernel: aha152x1: vital data: rev=1, io=0x340 (0x340/0x340), irq=11, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=1000, extended translation=disabled Oct 2 11:14:46 freedom kernel: aha152x1: trying software interrupt, lost. Oct 2 11:14:46 freedom kernel: aha152x1: IRQ 11 possibly wrong. Please verify. Expected Results: Driver should have loaded Additional info: This system is a 7.3 (2.4.18-4) to 8.0 (2.4.18-18) upgrade, the command in question is run from /etc/rc.modules After upgrade it simply fails.
Comment 1 Phil Schaffner 2002-10-05 09:51:08 UTC
Also encountered this bug after upgrade from 7.3 (all patches installed) to 8.0. Tried editing /etc/pcmcia/config.opts to disable/allow various IRQs but to no avail. RH 8.0 can't seem to see the Jaz/Adaptec 152x cardbus adapter that was working under 7.3. This looks a lot like bug #67285 from 7.3. Machine is an IBM A21p. Relevant section of dmesg for current config: Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 00:02.0 PCI: Sharing IRQ 11 with 00:05.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Found IRQ 11 for device 00:02.1 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000010 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. SCSI subsystem driver Revision: 1.00 aha152x: processing commandline: ok aha152x: BIOS test: passed, detected 1 controller(s) aha152x: resetting bus... aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x0: trying software interrupt, lost. aha152x0: IRQ 3 possibly wrong. Please verify. aha152x_cs: no SCSI devices found
Comment 2 Michael Olson 2002-10-08 16:56:41 UTC
As a quick workaround, I rolled the kernel in 8.0 back to 2.4.18-10 and now it works.
Comment 3 tjackson 2002-10-11 21:45:59 UTC
Saw this with the 2.4.18-5 kernel also.
Comment 4 Arjan van de Ven 2002-10-17 09:22:42 UTC
An errata has been issued which should help the problem described in this bug report. This report is therefore being closed with a resolution of ERRATA. For more information on the solution and/or where to find the updated files, please follow the link below. You may reopen this bug report if the solution does not work for you. http://rhn.redhat.com/errata/RHSA-2002-206.html
Comment 5 Dave Strandberg 2002-10-30 18:10:22 UTC
The errata probably helps people with installed systems that are adding the aha152x card to their system, but I need a new driver disk (pcmcia.img or pcmciadd.img) so that I can get the aha152x module loaded before installating RH8.0 to my external SCSI drive.
Comment 6 Jeremy Katz 2002-10-31 20:37:04 UTC
*** Bug 76678 has been marked as a duplicate of this bug. ***
Comment 7 Phil Schaffner 2002-11-01 16:20:26 UTC
Ditto on the need for a driver disk.