|Summary:||usbhid claims control of Wacom PenPartner tablet|
|Product:||[Fedora] Fedora||Reporter:||Lukas Riha <lukas.riha>|
|Component:||kernel||Assignee:||Dave Jones <davej>|
|Status:||CLOSED INSUFFICIENT_DATA||QA Contact:||Brian Brock <bbrock>|
|Version:||4||CC:||davej, pfrields, wtogami|
|Fixed In Version:||Doc Type:||Bug Fix|
|Doc Text:||Story Points:||---|
|Last Closed:||2006-05-04 13:55:49 UTC||Type:||---|
|oVirt Team:||---||RHEL 7.3 requirements from Atomic Host:|
|Cloudforms Team:||---||Target Upstream Version:|
Description Lukas Riha 2005-06-21 17:08:30 UTC
From Bugzilla Helper: User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.8) Gecko/20050524 Fedora/1.0.4-4 Firefox/1.0.4 Description of problem: When I plug in Wacom PenPartner, I cannon get it to work in any reasonable way. It seems usbhid is taking control of it, preventing wacom driver to load. Can't get the tablet to work in absolute mode. Version-Release number of selected component (if applicable): kernel-2.6.11-1.1369_FC4 How reproducible: Always Steps to Reproduce: 1.Plug-in Wacom PenPartner 2.Watch /var/log/messages and /proc/bus/usb/devices 3. Actual Results: LED lights up, tablet works in relative mode only. Expected Results: wacom driver would take control and it would be possible to use the tablet in absolute mode. Additional info: Output of /proc/bus/usb/devices : T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=056a ProdID=0061 Rev= 1.42 S: Manufacturer=WACOM S: Product=FT-0203-UV1.4-2 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms Output of var/log/messages : Jun 21 18:33:15 NTB-Lukas kernel: usbcore: registered new driver wacom Jun 21 18:33:15 NTB-Lukas kernel: drivers/usb/input/wacom.c: v1.40:USB Wacom Graphire and Wacom Intuos tablet driver Jun 21 18:33:15 NTB-Lukas hal.hotplug: DEVPATH is not set (subsystem input) Jun 21 18:35:00 NTB-Lukas kernel: usb 4-1: USB disconnect, address 3 Jun 21 18:35:00 NTB-Lukas hal.hotplug: DEVPATH is not set (subsystem input) Jun 21 18:35:32 NTB-Lukas kernel: usb 4-1: new low speed USB device using uhci_hcd and address 4 Jun 21 18:35:32 NTB-Lukas kernel: input,hiddev96: USB HID v1.10 Mouse [WACOM FT-0203-UV1.4-2] on usb-0000:00:1d.2-1 Jun 21 18:35:32 NTB-Lukas hal.hotplug: DEVPATH is not set (subsystem input) (I've also tried Graphire2 and it seems to work)
Comment 1 Lukas Riha 2005-06-22 15:05:08 UTC
Created attachment 115814 [details] patch used - please doublecheck
Comment 2 Lukas Riha 2005-06-22 15:06:49 UTC
Got some more info - recompiled kernel with patch (included as att.), and got these results from cat /proc/bus/usb/devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=056a ProdID=0061 Rev= 1.42 S: Manufacturer=WACOM S: Product=FT-0203-UV1.4-2 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=wacom E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms and these from tail /var/log/messages : Jun 22 16:46:41 NTB-Lukas kernel: usb 4-1: new low speed USB device using uhci_hcd and address 7 Jun 22 16:46:41 NTB-Lukas kernel: usbhid: probe of 4-1:1.0 failed with error -5 Jun 22 16:46:41 NTB-Lukas kernel: input: Wacom Penpartner 04 on usb-0000:00:1d.2-1 Jun 22 16:46:41 NTB-Lukas hal.hotplug: DEVPATH is not set (subsystem input) The x-y point count (resolution) were taken from Wacdump 0.5.2 (from linuxwacom 0.6.8). Please doublecheck before using, this was just my guess, but seems to work, at least partially (got it to work in absolute mode) - have to test it more (especially tweak the xorg.conf more).
Comment 3 Dave Jones 2005-07-15 21:41:42 UTC
[This comment has been added as a mass update for all FC4 kernel bugs. If you have migrated this bug from an FC3 bug today, ignore this comment.] Please retest your problem with todays 2.6.12-1.1398_FC4 update. If your problem involved being unable to boot, or some hardware not being detected correctly, please make sure your /etc/modprobe.conf is correct *BEFORE* installing any kernel updates. If in doubt, you can recreate this file using.. mv /etc/sysconfig/hwconf /etc/sysconfig/hwconf.bak mv /etc/modprobe.conf /etc/modprobe.conf.bak kudzu Thank you.
Comment 4 Lukas Riha 2005-07-19 14:08:59 UTC
Created attachment 116930 [details] contents of /proc/bus/usb/devices
Comment 5 Lukas Riha 2005-07-19 14:10:12 UTC
Created attachment 116931 [details] contents of /var/log/messages
Comment 6 Lukas Riha 2005-07-19 14:14:54 UTC
Made test as requested (including creating new hwconf and modprobe.conf files). Unfortunatelly, the results are essentially the same as when the bug was reported. Contents of /proc/bus/usb/devices and /var/log/messages in above attechments.
Comment 7 Dave Jones 2005-09-30 07:14:16 UTC
Mass update to all FC4 bugs: An update has been released (2.6.13-1.1526_FC4) which rebases to a new upstream kernel (188.8.131.52). As there were ~3500 changes upstream between this and the previous kernel, it's possible your bug has been fixed already. Please retest with this update, and update this bug if necessary. Thanks.
Comment 8 Lukas Riha 2005-10-11 18:19:36 UTC
Retested, problem persists, with exactly the same results. Also, the above "patch" doesn't work directly anymore as a result of newer version of wacom.c source file. I've checked linuxwacom project, they have newer versions of necessary files for 2.6.11 kernel base. Although Wacom Penpartner 2(Penpartner 2004) isn't listed by name, the prod.id is taken by Volito 2 which might essencialy be the same product with different name. Thanks.
Comment 9 Dave Jones 2005-11-10 20:23:08 UTC
2.6.14-1.1637_FC4 has been released as an update for FC4. Please retest with this update, as a large amount of code has been changed in this release, which may have fixed your problem. Thank you.
Comment 10 Lukas Riha 2005-12-02 18:51:54 UTC
Tested with 2.6.14-1.1644_FC4. If I am not mistaken, nothing has changed. dmesg: usb 4-1: new low speed USB device using uhci_hcd and address 3 input,hiddev96: USB HID v1.10 Mouse [WACOM FT-0203-UV1.4-2] on usb-0000:00:1d.2-1
Comment 11 Dave Jones 2005-12-27 23:27:40 UTC
This looks to be fixed in 2.6.15rc (There's a preview FC4 kernel at http://people.redhat.com/davej/kernels/Fedora/FC4, though this needs a new udev which isn't available yet). I'm going to do another 2.6.14 based kernel which should fix this in a few days.
Comment 12 Dave Jones 2006-02-03 06:10:52 UTC
This is a mass-update to all currently open kernel bugs. A new kernel update has been released (Version: 2.6.15-1.1830_FC4) based upon a new upstream kernel release. Please retest against this new kernel, as a large number of patches go into each upstream release, possibly including changes that may address this problem. This bug has been placed in NEEDINFO_REPORTER state. Due to the large volume of inactive bugs in bugzilla, if this bug is still in this state in two weeks time, it will be closed. Should this bug still be relevant after this period, the reporter can reopen the bug at any time. Any other users on the Cc: list of this bug can request that the bug be reopened by adding a comment to the bug. If this bug is a problem preventing you from installing the release this version is filed against, please see bug 169613. Thank you.
Comment 13 John Thacker 2006-05-04 13:55:49 UTC
Closing per previous comment.